Pur Filters

STEP 1.

CUT 2 SETS OF HOSES about 1ft in LENGTH from the ROLL OF HOSE THAT CAME WITH THE UNIT.

STEP 2.

DISCONNECT HOSE FROM THE TOP OF THE RO AND THE TOP OF EF2 FILTER.

STEP 3

DISCONNECT HOSE FROM THE BOTTOM OF EF3/EF4

STEP 4

CONNECT 1ST SET OF 1FT HOSE TO TOP OF EF2

STEP 5

TAKE THE OTHER END OF THE 1FT OF HOSE THAT YOU JUST CONNECTED TO THE TOP OF EF2 AND CONNECT IT TO THE BOTTOM OF EF3/EF4

STEP 6

CONNECT THE 2ND SET OF 1FT HOSE TO THE TOP OF EF3/EF4 AND LEAD THE LOOSE END OF IT TO A SEPARATE CONTAINER (empty cup, glass, bowl, plate, etc. anything you can find that can hold at least 1qt of water.)

STEP 7

FILL THE BOTTOM TANK WITH WATER (faucet water, distilled water, city water, etc. ANYTHING THAT IS AVAILABLE TO YOU AS LONG AS ITS WATER.)

STEP 8

Plug in the machine and turn the power On.

STEP 9
Start cleaning the filtration system by operating the unit. Keep checking the water level
of the bottom tank and fill with municipal (city) water until only clean water flows into
the water tank.

STEP 10

ONCE WATER IS CLEAR AND NO MORE CARBON, RE-CONNECT THE HOSES BACK TO ITS ORIGINAL CONNECTION ANS POSITIONING.

Duration : 0:2:27

This entry was posted on Thursday, December 17th, 2009 at 10:04 pm and is filed under Faucet Water Filter. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.